Preparation; Menu Driven Mode - HP A6829A User's Manual And Service Manual

The EFI utility should be executed from a diskette or CD-ROM. For EFI
based systems without a floppy diskette drive, burning the EFI utility
and other firmware images onto a CD-ROM allows proper execution, but
with reduced functionality. In such a situation, you will not be able to
save an image of the flash memory to the CD-ROM.

Preparation

While booting the EFI enabled systems, the diskette or CD-ROM
containing the EFI utility needs to be in the drive to allow device
mapping. The EFI utility and firmware image files are located in the root
directory or in a subdirectory on the diskette or CD-ROM.
Boot the system to the EFI shell prompt. The floppy diskette drive or
CD-ROM drive should appear in the list of mapped devices as fs0.
In systems with a floppy drive, type fs0 at the EFI shell prompt to
change to this device.

Menu Driven Mode

If the EFI utility and firmware image files are located in the root
directory, enter the efi8xxfl command at the prompt as illustrated
below; otherwise, move to the directory in which these files are located
and continue.
The following main window screen appears:
Vendor Device
Choice ID
------- -------- -------- ------- ------ ------ ------- ------------
1 0x1000
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCSI
2 0x1000
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCSI
3 0x1000
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCSI
4 0x1000
LSI Logic, Inc. SYMC1010 Ultra160 66Mhz SCSI
Chapter 2
fs0:\> efi8xxfl
ID Seg Bus
0x021 0x00 0x15
0x021 0x00 0x15
0x021 0x00 0x3F
0x021 0x00 0x3F
Get other manuals https://www.bkmanuals.com
Installing the A6829A Adapter
Using the EFI Flash Utility
Dev Func Flash Part
0x01 0x00 M29F010B
0x01 0x01 M29F010B
0x01 0x00 Am29F010
0x01 0x01 Am29F010
63