Windows System Requirements; Pda System Requirements; About This User's Guide - HP bt1300 User Manual

®
Windows System Requirements
To optionally configure the hp bt1300 settings using the provided Configuration Utility, your system
should include the following components:
A PC with a 133 MHz or higher processor
Microsoft Windows 98SE, ME, 2000, or XP operating system
At least 64 MB of RAM (memory)
At least 10 MB of free hard disk space to install the software
A CD-ROM drive (to load the software)
A PC equipped with a Bluetooth USB or PCMCIA card. For a list of compatible Bluetooth
USB, PCMCIA and PC adapter cards, visit the HP web site at
http://www.hp.com/support/bluetoothprinteradapter.
Vendor-supplied software for your USB or PCMCIA adapter card that supports one or more of
the supported profiles (OPP, BIP, BPP, HCRP, or SPP) is required to run your PC with the hp
bt1300.

PDA System Requirements

For information on printing to the hp bt1300 from a Pocket PC operating system or a Palm OS-based
PDA (Personal Digital Assistant), refer to the information provided in this user's guide or visit the HP
web site at http://www.hp.com/support/bluetoothprinteradapter.

About This User's Guide

This user's guide contains information on system requirements, important safety tips, and instructions
on the following:
Installing the hp bt1300 Bluetooth wireless printer adapter hardware
Installing the hp bt1300 Configuration Utility
Configuring the hp bt1300 using the Configuration Utility and Bluetooth software for Windows
Using the hp bt1300 with a Microsoft Windows system
Using the hp bt1300 with other Bluetooth-enabled devices such as mobile phones, PDAs, and
digital cameras.
HP Printer Adapter User's Guide 1- 3