The Scsi Command - HP A6829A User's Manual And Service Manual

Troubleshooting
Setting and Confirming SCSI Parameters

The SCSI Command

The SCSI command can be used to display and set SCSI bus parameters
to ensure that the SCSI adapter is compatible with the SCSI devices.
Displaying Transfer Rates
To display the SCSI transfer rate for an adapter using the SCSI
command, use the following syntax:
SCSI rate bus_number slot_number
where
bus_number
slot_number
For example:
•
•
76
Specifies the number of the bus on which the adapter is
installed.
Specifies the number of the slot the adapter is in.
To display the SCSI transfer rate for an adapter installed on bus 5
slot 2, issue the following command:
SCSI rate 5 2
The command displays the following output:
PCI device /5.2 = no limit
To list transfer rates for all the bus and slot numbers, issue the
following command:
SCSI rate
Get other manuals https://www.bkmanuals.com
Chapter 3