Table of Contents
Advertisement
Installing the SCSI Miniport Driver
Windows Server 2003 Device Driver Installation
This section describes the instructions for installing the Windows Server 2003
SCSI Miniport driver.
Windows Server 2003 System Requirements
Ensure that your system meets these minimum requirements:
Installing the Windows Server 2003 SCSI Miniport Driver
This section contains the steps for installing the Windows Server 2003 SCSI
Miniport device driver on a Windows Server 2003.
From the Windows Server 2003 desktop:
1. Click Start > Settings > Control Panel.
2. Double-click Administrative Tools.
3. Double-click Computer Management.
4. Click Device Manager.
5. Open the SCSI and RAID controllers item in the list.
6. Choose the Drivers tab.
7. Choose Update Driver.
8. Choose Install the software automatically (Recommended) and click Next.
9. Click Finish.
10. Click Yes to restart Windows Server 2003.
11. Verify the device driver installation:
32
Installed HBA
Ensure the HP Setup and Configuration CD for Itanium(R) 2-based servers is
in the server or the driver has been downloaded from the web and copied to
the server hard drive.
StorageWorks Fibre Channel Storage subsystem (interconnect device and
storage device)
a. Click Start > Settings > Control Panel.
b. Double-click the System icon.
c. Click Device Manager.
Host Bus Adapter for Windows and Linux Installation Guide
Advertisement
Table of Contents
