Reinstalling The Jack And Tools - Jeep GLADIATOR 2022 Owner's Manual

3. Attach the lug wrench to the extension tubes with
the curved angle facing away from the vehicle.
Insert the extension tubes through the access hole
between the lower tailgate and the top of the fascia/
bumper and into the winch mechanism tube.
Rotating The Lug Wrench Handle
CAUTION!
The winch mechanism is designed for use with the
jack wrench extension tool only. Use of air wrench or
power tool may damage the winch.
4. Rotate the lug wrench handle clockwise until the
wheel is drawn into place against the underside of
the vehicle. Continue to rotate until you feel the
winch mechanism slip, or click three or four times. It
cannot be overtightened. Push against the tire sev-
eral times to ensure it is firmly in place.
Reinstalling The Flat Or Spare Tire
WARNING!
A loose tire or jack thrown forward in a collision or
hard stop could endanger the occupants of the
vehicle. Always stow the jack parts and the spare tire
in the places provided. Have the deflated (flat) tire
repaired or replaced immediately.
REINSTALLING THE JACK AND
TOOLS
1. Tighten the jack all the way down by turning the jack
turn-screw counterclockwise until the jack is snug.
2. Position the jack and tool bag. Make sure the lug
wrench is under the jack near the jack turn-screw.
IN CASE OF EMERGENCY
Jack And Tool Bag
3. Secure the tool bag straps to the jack.
4. Place the jack and tools in the storage position hold-
ing the jack by the jack turn-screw, place the jack
and tools under the rear seat.
5. Turn the wing bolt clockwise to secure to the floor
pan.
Jack Hold Down Wing Bolt
291
7