Jeep GLADIATOR 2022 Owner's Manual page 186

184 MULTIMEDIA
Setting Name
Keyboard
Touchscreen Beep
Control Screen Timeout
Navigation Next Turn Pop-ups Displayed in Cluster
Phone Pop-ups Displayed In Cluster
Units
When the Units button is pressed on the touchscreen, the system displays the different measurement options. The selected unit of measurement will display in the instrument
cluster display and Navigation system (if equipped). The available settings are:
NOTE:
Depending on the vehicle's options, feature settings may vary.
Setting Name
US
Metric
Custom
This setting will change the keyboard type on the display. The selectable keyboards are "ABCDEF Keyboard", "QWERTY
Keyboard", and "AZERTY Keyboard".
This setting will allow you to turn the touchscreen beep on or off.
This setting allows you to set the Control Screen to turn off automatically after five seconds or stay open until manually
closed.
This setting will display navigation prompts in the Instrument Cluster Display.
This setting will display smartphone notifications and messages in the Instrument Cluster Display.
This setting will change the unit of measurement on the display to US.
This setting will change the unit of measurement on the display to Metric.
The setting changes the "Speed" (MPH or km/h), "Distance" (mi or km), "Fuel Consumption" (MPG [US], MPG [UK],
L/100 km, or km/L), "Pressure" (psi, kPa, or bar), and "Temperature" (°C or °F) units of measurement independently.
Description
Description