Jeep GLADIATOR 2022 Owner's Manual page 67

Below are the steps needed for Qualcomm TrueWire-
less™ Stereo:
1. Push and hold the power button on both Jeep®
wireless speakers until both speakers turn on.
2. Place both speakers into Qualcomm TrueWireless™
Stereo pairing mode. This can be achieved by press-
ing and holding the Battery Status button on both
speakers until an audio notification is heard from
both speakers.
3. Connect one of the Jeep® wireless speakers to the
Bluetooth® source. Refer to previous section
"Phone & Bluetooth® Pairing" for additional
information.
4. Once the Jeep® wireless speaker is connected to
the Bluetooth® device, audio will be played from
both speakers.
NOTE:
While in Qualcomm TrueWireless™ Stereo mode, the
volume will not have independent speaker control.
Pushing the Up or Down Volume button on either Jeep®
wireless speaker will affect the audio output on both, as
well as volume adjustments on the Bluetooth® device.
Waterproof Features
The Jeep® wireless speaker is IP67 waterproof certified
with design in mind to withstand rainfall, waterjets,
splashing and being submerged in up to 3 ft (1 m) of
water for up to 30 minutes.
CAUTION!
Ensure the Jeep® Wireless Speaker is prepared for
use in wet environments by removing all cable con-
nections and making sure all port covers are sealed
tightly. If the cover is not secured properly, the Jeep®
Wireless Speaker may sustain water damage.
Warnings, Caution & Legal Information
To reduce the risk of fire or electric shock, do not
expose the Jeep® wireless speaker to rain or moisture
while charging. The Jeep® wireless speaker should not
be exposed to dripping or splashing, and objects filled
with liquids, such as vases, should not be placed on or
near it while being charged or charging other devices.
As with any electronic products, use care not to spill
liquids into any part of the product. Liquids can cause a
failure and/or a fire hazard. The power supply must be
used indoors only. Make no modifications to the prod-
uct or accessories. Unauthorized alterations may com-
promise safety, regulatory compliance, and system per-
formance, and will void the warranty. Do not place any
flame sources, such as lighted candles, on or near the
Jeep® wireless speaker. The Jeep® wireless speaker
contains small parts that may be a choking hazard and
is not suitable for children under age 3. Do not continue
charging the battery if it does not reach full charge
within the specified charging time. Overcharging may
cause the battery to become hot, rupture, or ignite. If
you see any heat deformation or leakage, properly dis-
pose of the battery. Do not attempt to charge the bat-
tery in temperatures outside the range of 32°- 104°F
(0° - 40°C). If the battery begins to leak, do not allow
the liquid to come in contact with your skin or eyes. If
contact has been made, wash the affected area with
plenty of water and seek medical attention immedi-
GETTING TO KNOW YOUR VEHICLE
ately. Do not expose the Jeep® wireless speaker or bat-
tery to excessive heat, including direct sunlight or fire.
Do not store or use inside cars in hot weather, where it
can be exposed to temperatures in excess of 115°F
(60°C). Doing so may cause the battery and power sup-
ply to generate heat, rupture, or ignite. Using the Jeep®
wireless speaker in this manner also may result in a
loss of performance and a shortened life expectancy.
Extended exposure to direct sunlight may damage the
external appearance and material qualities. Do not step
on, throw, or drop batteries or the power supply or
device, or expose them to a strong shock. Do not
pierce, crush, dent, or deform the batteries or power
supply in any way. If either becomes deformed, properly
dispose of it. Do not short-circuit batteries. Do not
attempt to service the Jeep® wireless speaker yourself.
Opening or removing covers may expose you to danger-
ous voltages or other hazards and will void the manu-
facturer's warranty. To prevent risk of fire or electric
shock, avoid overloading wall outlets, extension cords,
or integral convenience receptacles. Your Bluetooth®
device (mobile phone, music player, tablet, laptop, etc.)
must support the A2DP Bluetooth® profile in order to
work wirelessly with your Jeep® wireless speaker. The
A2DP profile is supported by most recent mobile prod-
ucts with built-in Bluetooth® capability. Please refer to
your device's user manual for details and instruction
regarding the Bluetooth® profiles it supports. This
device complies with part 15 of the FCC Rules. Opera-
tion is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Jeep® follows Safety Instruction for CE- LV. Do not oper-
ate products in temperatures outside the range of -5 to
40°C. Operating Frequency Band: 2402 MHz to
2480 MHz. Maximum RF power: 6 dBm EIRP. Do not
65
2