Door Off Mirror Kit - If Equipped - Jeep GLADIATOR 2022 Owner's Manual

30 GETTING TO KNOW YOUR VEHICLE
NOTE:
Squeeze the tab on the base of the wiring harness.
This will unlock the connector tab, allowing the wir-
ing connector to be unplugged.
Wiring Connector
6. With the door in the open position, remove the
check bolt from the door check attachment on the
body (using a #T40 Torx head driver).
NOTE:
Keep the check arm in the extended position for
easier reinstallation.
Door Check
7. With the door open, lift the door with the help of
another person, to clear the hinge pins from their
hinges and remove the door.
To reinstall the door(s), perform the previous steps in
the reverse order.
NOTE:
The upper hinge has a longer pin, which can be used to
assist in guiding the door into place when reinstalling.
When reinstalling the check arm attachment bolt, bolt
torque should be between 11.76 ft·lb / 16 N·m and
27.9 ft·lb / 38 N·m.
CAUTION!
•
Hinge pins can break if overtightened during door
reinstall (Max Torque: 5.88 ft·lb / 8 N·m). For infor-
mation on off-road driving tips, see
•
Do not overtighten Torx fasteners. Damage to the
vehicle's parts will occur.
DOOR OFF MIRROR KIT —
IF EQUIPPED
If equipped with the Door Off Mirror Kit, exterior rear-
view mirrors can be installed on to the upper body door
hinges after the front doors have been removed.
•
All occupants must wear seat belts during off-road
operation with doors removed. For off-road driving
tips, see page 175.
•
Do not store detached doors inside of the vehicle,
as they may cause personal injury in the event of
an accident.
page 175.
WARNING!
Door Off Mirror