Jeep GLADIATOR 2022 Owner's Manual page 192

Table of Contents

Advertisement

190
MULTIMEDIA
AUX Switches — If Equipped
When the AUX button is pressed on the touchscreen, the system displays the options related to the four vehicle AUX switches:
NOTE:
Depending on the vehicle's options, feature settings may vary.
Setting Name
AUX 1-4
Key Off Options/Engine Off Options
When the Key Off Options/Engine Off Options button is pressed on the touchscreen, the system displays the options related to vehicle shutoff. These settings will only activate
when the ignition is set to OFF.
NOTE:
Depending on the vehicle's options, feature settings may vary.
Setting Name
Easy Exit Seat
Doors On Engine Off Power Delay
Doors Off Engine Off Power Delay
Headlight Off Delay
Auto Entry/Exit Suspension
This setting will adjust the type and power source for the four vehicle AUX switches. There are two types: "Latching" and
"Momentary". The power source for the AUX switches can either be set to run off the "Battery" or from the "Ignition". In
addition to setting the type and power source, you can set if the vehicle will recall the previous state at which the AUX
switches were set. The Recalled Last State setting can be set to "On" or "Off". Last state conditions are met only if the
type is set to Latching and the power source is set to Ignition.
This setting adjusts the seats to make exiting the vehicle easier.
This setting will keep certain electrical features running after the engine is turned on. When any door is opened, the elec-
tronics will deactivate. The available settings are "0 sec", "45 sec", "5 min", and "10 min".
This setting will keep certain electrical features running after the engine is turned off. When any door is opened, the elec-
tronics will deactivate. The available settings are "0 sec", "45 sec", "5 min", and "10 min".
This setting will allow you to set the amount of time the headlights remain on after the vehicle has been turned off. The
"+" will increase the amount of time. The "-" will decrease the amount of time.
This setting will automatically lower the vehicle ride height for easier entry and exit of the vehicle.
Description
Description

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents