Table of Contents
Advertisement
Reinstalling The Flat Or Spare Tire
WARNING!
A loose tire or jack thrown forward in a collision or
hard stop could endanger the occupants of the
vehicle. Always stow the jack parts and the spare tire
in the places provided. Have the deflated (flat) tire
repaired or replaced immediately.
REINSTALLING THE JACK AND
TOOLS
1. Position the jack and tool bag. Make sure the lug
wrench is under the jack near the jack turn-screw.
Jack And Tool Bag
2. Tighten the jack all the way down by turning the jack
turn-screw counterclockwise until the jack is snug.
3. Secure the tool bag straps to the jack.
4. Place the jack and tools in the storage position hold-
ing the jack by the jack turn-screw, place the jack
and tools under the rear seat.
5. Turn the wing bolt clockwise to secure to the floor
pan.
IN CASE OF EMERGENCY
Jack Hold Down Wing Bolt
WARNING!
After using the jack and tools, always reinstall them in
the original carrier and location. While driving you
may experience abrupt stopping, rapid acceleration
or sharp turns. A loose jack, tools or bracket or other
objects in the vehicle may move around with force,
resulting in serious injury.
239
7
Advertisement
Table of Contents
