Hard Top Front Panel(S) Removal - Jeep GLADIATOR 2022 Owner's Manual

Step Five
Torque Specifi-
cation For Torx Maximum
Fasteners
119.5 in-lb 150.5 in-lb
(13.5 N·m) (17.0 N·m)
CAUTION!
Do not overtighten Torx fasteners. You can strip the
fasteners if they are overtightened.
6. Before driving the vehicle with the top in the
Sunrider® position, ensure the top is secured with
the provided hook-and-loop fasteners
Minimum
106.2 in-lb
(12.0 N·m)
HARD TOP FRONT PANEL(S)
REMOVAL
Use this QR code to access your digital
experience.
Step Five
•
page 77.
•
•
•
Step Six
•
•
GETTING TO KNOW YOUR VEHICLE
CAUTION!
The hard top is not designed to carry any addi-
tional loads, such as after-market roof racks, spare
tires, building materials, hunting or camping sup-
plies, etc. page 97.
Do not move your vehicle until the top has been
either fully attached to the front header, sport bar,
and body, or fully removed.
Failure to follow these cautions may cause interior
water damage, stains or mildew:
It is recommended that the top be free of water
prior to panel removal. Removing the top, opening
a door, or lowering a window while the top is wet
may allow water to drip into the vehicle's interior.
The hard top assembly must be positioned prop-
erly to ensure sealing. Improper installation can
cause water to leak into the vehicle's interior.
Careless handling and storage of the removable
roof panels may damage the seals, causing water
to leak into the vehicle's interior.
The front panel(s) must be positioned properly to
ensure sealing. Improper installation can cause
water to leak into the vehicle's interior.
81
2
Scan me