Ifb (Return Audio) - JVC GY-HC900CHE Instructions Manual

IFB (Return Audio)

Return audio from the network can be played
through a headphone.
Memo :
This feature is only usable in the Camera mode.
0
Start the encoder before activating Return over
0
IP. To end, turn off Return over IP before shutting
down the encoder. When the bit rate or frame
rate of the encoder is changed, adjust the
camera settings according to the encoder
settings, followed by restarting the camera.
This feature is available when [System] B
0
[Record Set] B [Record Format] B [System] is
set to "HD" or "SD". When [WFrame Rate] is set
to "24p", this feature is not available.
(A P143 [ Return over IP... ] )
Configuring the Return over IP Server
Configure the Return over IP settings and establish
the connection before displaying the return video.
1 Register the [Return Server].
Configure [Network] B [Return over IP] B
[Server] to "Server".
Configure the individual settings in the [Return
Server] item.
Memo :
For details on the registered information, please
0
consult the network administrator for the server.
Configure "Icecast" to [Type].
0
Operates as IFB when the setting is configured
to "Icecast".
Return Audio from the Network (IFB)
1 Set the camera recorder to the Camera
mode.
(A P20 [Operation Modes] )
2 Assign the "Return over IP" function to any
of the user buttons.
(A P45 [Assignment of Functions to User
Buttons] )
Memo :
The "Return over IP" feature can also be
0
operated using "On"/"Off" under [Network] B
[Return over IP] B [Return over IP].
228
IFB (Return Audio)
3 Configure the input destination of the
return video to "Network".
To specify the input destination of the return
video, configure [A/V Set] B [Video Set] B
[Return Input] to "Network".
(A P138 [ Return Input ] )
Memo :
When [System] B [Record Set] B [Record
0
Format] B [System] is configured to "HD(SDI
In)" or "SD(SDI In)", "---" is displayed and the
setting cannot be configured.
4 Press the user button that is assigned with
the "Return over IP" function.
When Return over IP is activated, the settings
in [A/V Set] B [Audio Set] B [IFB/RET Monitor]
will be applied to the audio.
(A P141 [ IFB/RET Monitor... ] )