JVC GY-HC900CHE Instructions Manual page 173

R Luminance Information
Displayed when the Spot Meter function is
activated.
MAX : Maximum luminance
MIN : Minimum luminance
S Zebra pattern
During zebra pattern display,
is displayed on the display screen in Camera
mode.
(A P82 [Setting Zebra Pattern] )
T Time Display
Displays the current time.
Memo :
The date/time display style can be configured in
0
[System] B [Date/Time].
When [System] B [Record Set] B [Time Stamp]
0
is set to "On", this item is not displayed.
U Focus Display
Displays the approximate distance to the
subject in focus during manual focus.
Memo :
The displayed unit of measurement (feet or
0
meter) can be configured in [LCD/VF] B [Display
Type] B [Focus].
This item may not be displayed depending on
0
the lens used.
V Zoom Display
Displays the zoom position. (Zoom bar or
0
value)
.
The zoom bar will only be displayed for 3
0
seconds after the zoom operation is
activated.
The value will always be displayed. (Z00 to
0
99)
Memo :
The mode of display (value or bar) can be
0
configured in [LCD/VF] B [Display Type] B
[Zoom].
This item may not be displayed depending on
0
the lens used.
W Network Connection Icon
USB connection or built-in wireless LAN
0
connection u v
0
(A P144 [ USB/Int. WLAN u v ] )
(zebra icon)
0
(A P145 [ Default Gateway ] )
.
display)
Memo :
The icon appears blinking when the camera
0
recorder is starting up, and is displayed in yellow
while getting ready to connect.
LAN terminal connection
0
In the case of connecting to an external network,
check the destination in [Network] B
[Connection Setup] B [Default Gateway].
display)
Memo :
The icon appears blinking when the camera
0
recorder is starting up, and is displayed in yellow
while getting ready to connect.
Set [Network] B [Connection Setup] B
[USB/Int. WLAN] to "On". u v
In the case of connecting to an external
network, check the destination in
[Network] B [Connection Setup] B
[Default Gateway].
Icon Status
Wireless LAN connection from the
host terminal (USB) is established
.
Wired LAN connection from the
host terminal (USB) is established
.
Cellular adapter connection from
the host terminal (USB) is
established
.
When a USB adapter different
from the connection settings is
detected
.
Built-in wireless LAN connection is
established
u v
When [USB/Int. WLAN] is set
0
to "Off"
(No
u v
When an unusable USB
0
adapter is detected
Icon Status
LAN terminal connection is
established
.
(No When the LAN cable is not
connected
Display Screen in Camera Mode
173