Overlay Settings Menu - JVC GY-HC900CHE Instructions Manual

Overlay Settings Menu

This screen is used to configure overlay settings.
Images can be overlaid onto recorded video and
live stream video.
Overlay Function
For specifying whether to activate the overlay
function.
[Setting Values: Enable, RDisable]
Memo :
The setting cannot be changed during
0
recording, streaming or Return over IP.
When [System] is configured to a setting other
0
than "HD" and "HD+Web", this item is fixed at
"Disable".
When [Slot Mode] is set to "Backup
0
item is fixed at "Disable".
When "Disable" is selected, settings of the
0
overlay function cannot be changed.
Layout
For selecting a SDP file.
Memo :
Create a SDP file using SDP Generator in
0
Windows or Mac before recording.
Import User Layout
Load the SDP file that is created by using SDP
Generator onto this camera recorder.
Memo :
Maximum 4 files can be saved in this camera
0
recorder.
The SDP file may not be saved depending on
0
the available memory capacity of the camera
recorder.
Delete User Layout
For deleting the SDP file.
Memo :
The SDP file is not deleted by selecting [System]
0
B [Reset All]. Delete the file from the camera
recorder.
Type
By selecting [Type], overlay images can be
displayed.
[Setting values: Broadcast, RNone]
Output
For specifying overlay output settings.
9 REC
For setting whether to record overlay images
together with the recorded video into an SD card.
On:
0
Saves the video with overlay images into an SD
card.
Off:
0
Overlay images are not recorded into an SD
card.
", this
[Setting Values: ROn, Off]
Memo :
Displays overlay images on the recording in slot
0
B when [System] is configured to "HD+Web".
When the setting is configured to "Off", live
0
streaming is limited to a maximum bit rate of 12
Mbps.
9 SDI OUT2
For setting whether to display overlay images on
SDI OUT2 output.
On:
0
Displays overlay images on streaming videos
and SDI OUT2 output.
Off:
0
Displays overlay images only on streaming
videos.
[Setting values: ROn, Off]
Overlay Settings Menu
155