JVC GY-HC900CHE Instructions Manual page 115

Lolux
To increase the sensitivity when in dim
surroundings, set a value in the Lolux mode.
When [LCD/VF] B [Display Type] B [Gain] is set
0
to "dB":
[Setting Values: 42 dB, R36 dB, 30 dB, 24 dB]
When [LCD/VF] B [Display Type] B [Gain] is set
0
to "ISO":
[Setting Values: ISO 102400, RISO 51200, ISO
25600, ISO 12800]
Clip Review
For configuring the behavior when operating the
user button that is assigned with the "Clip Review"
function.
Last 5sec:
0
Views about 5 seconds of the clip from the
ending.
Top 5sec:
0
Views about 5 seconds of the clip from the
beginning.
Clip:
0
Views the entire clip.
[Setting Values: RLast 5sec, Top 5sec, Clip]
Spot Meter
For configuring the behavior when operating the
user button that is assigned with the "Spot Meter"
function.
Max & Min:
0
Displays the brightest and darkest areas of the
image.
Max:
0
Displays the brightest area of the image.
Min:
0
Displays the darkest area of the image.
Manual:
0
Displays the image brightness at a specified
position.
[Setting Values: RMax & Min, Max, Min, Manual]
Memo :
When "HLG" is selected in [Camera Process] B
0
[Color Space], the value of the spot meter
changes according to the setting of [LCD/VF] B
[Convert to ITU709]/[White Level].
AE Lock
For configuring the behavior when operating the
user button that is assigned with the "AE Lock"
function.
FAW:
0
Use this to fix the FAW (Full-time Auto White
Balance) function to the value when the user
button assigned with "AE Lock" is pressed.
AE:
0
Use this to fix the Auto function of Gain, Iris, or
Shutter to the value when the user button
assigned with "AE Lock" is pressed.
AE/FAW:
0
Use this to fix the FAW (Full-time Auto White
Balance) function and the Auto function of Gain,
Iris, or Shutter to the value when the user button
assigned with "AE Lock" is pressed.
[Setting Values: FAW, RAE, AE/FAW]
Memo :
This feature only works when Iris, Shutter, Gain
0
or White Balance is set to Auto mode.
"AE Lock" is canceled when the user button
0
assigned with "AE Lock" is pressed, or when any
of the functions that can be locked is operated
regardless of the mode (Manual or Auto).
"AE Lock" is canceled when the lens extender is
0
operated and when the iris is adjusted by 2/3
(two-third) stop or more.
"AE Lock" is canceled in the following cases.
0
When the user button that is assigned with
0
"AE Lock" is pressed
When changes are made to the iris (including
0
operation of the lens extender), gain and
shutter settings
When changes are made to the AE level
0
When there is a switch between the Camera
0
and Media modes
Zoom Speed
For configuring the zoom speed when operating
the user button that is assigned with "Zoom Tele"
or "Zoom Wide".
Increasing the value increases the speed.
[Setting Values: 8 to R 5 to 1]
Camera Function Menu
115