Selecting System Definition, File Format And Video Format - JVC GY-HC900CHE Instructions Manual

Selecting System
Definition, File Format and
Video Format
You can select the definition of the recorded
videos, file format for recording/playback, and the
video recording format on this camera recorder.
Setting the Record Format Menu
1 Set [System], [Format], [Resolution],
[Frame Rate] and [Bit Rate] in [System] B
[Record Set] B [Record Format].
2 Set each of the items.
A [Selecting a System Definition] (A P 56)
B [Selecting a File Format] (A P 57)
C [Selecting a Video Format] (A P 57)
D [Selecting the Aspect Ratio of SD Videos]
(A P 58)
3 After setting is complete for all items, press
the [USER1] button.
The recording format is switched.
0
A "Please Wait..." message appears on the
0
screen during switching.
Selecting a System Definition
The following definitions are available for selection.
HD EXT:
0
Records clips in the HD (High Definition)
resolution (1920x1080)
HD:
0
Records in HD (High Definition) resolution
(1920x1080 or 1280x720)
SD:
0
Records in SD (Standard Definition) resolution
(720x480 or 720x576)
Web:
0
Records in resolution (960x540, 720x480,
720x576, or 480x270) suitable for web
distribution
High-Speed:
0
Records in HD resolution (1920×1080)
56

Selecting System Definition, File Format and Video Format

You can select a definition for the recorded images
from the following items under [System].
HD EXT(SSD):
0
Records to the expansion slot in the HD EXT
quality.
HD:
0
Records in HD quality for both slots A and B.
SD:
0
Records in SD quality for both slots A and B.
HD(SDI In):
0
Records the HD SDI video of the device
connected to the [HD/SD SDI IN] terminal in
"HD" to both slot A and slot B.
SD(SDI In):
0
Records the SD SDI video of the device
connected to the [HD/SD SDI IN] terminal in
"SD" to both slot A and slot B.
HD+Web:
0
Records in HD quality for slot A, and Web quality
for slot B.
(A P88 [Recording Simultaneously at Two
Different Definitions] )
High-Speed:
0
Records in HD quality for both slots A and B.
Caution :
When [System] B [Record Set] B [Record
0
Format] B [System] is configured to "High-
Speed", network cannot be used via wireless
LAN u v or the [HOST] terminal (USB).
Configure as follows in this case.
Set [Network] B [Connection Setup] B [USB/
0
Int. WLAN] to "Off". u v
Unplug the USB network adapter
0
Note that camera operation will come to an
emergency stop and the power will turn off if the
above steps are not performed.
File data may be damaged if this happens while
recording is in progress.