Connecting The Headphone - JVC GY-HC900CHE Instructions Manual

Connecting the
Headphone
.
Audio output from the [PHONE] terminal can be
0
selected using [A/V Set] B [Audio Set] B
[PHONE Output] and the combination of the
[MONI SELECT] and [CH SELECT] switches.
(A P141 [ PHONE Output ] )
The outputs from the [PHONE] terminal and
0
monitor speaker are as follows according to the
different combinations of settings.
[MONI
[PHONE
SELECT]
Output]
Switch
Setting
Setting
[CH1/
-
CH3]
Mix
[BOTH]
Stereo
[CH2/
-
CH4]
1 Connect the headphone.
2 Select the channels to monitor using the
different combinations of the [MONI
SELECT] and [MONI SELECT] switches.
190

Connecting the Headphone

[PHONE]
Terminal
Speaker
L R
CH1 CH1
CH1+CH2
CH1+CH2
CH1 CH2
CH2 CH2
Combinations of
Channels
[MONI SELECT]
and [CH SELECT]
Monitor
Switches
CH1
.
CH2
.
CH1/CH2 The audio inputs
.
CH3
.
CH4
.
CH3/CH4 The audio inputs
.
3 Use the [MONITOR] adjustment knob to
adjust the monitor volume.
Memo :
There is no sound output from the speaker when
0
the headphone is connected.
to Description
The audio input to
[CH1] is output.
The audio input to
[CH2] is output.
to [CH1] and
[CH2] are output.
The audio input to
[CH3] is output.
The audio input to
[CH4] is output.
to [CH3] and
[CH4] are output.