JVC GY-HC900CHE Instructions Manual page 238

Error Message
Record Format Incorrect
Media Full
No Clips
No Media
No Media
No Clips
Please review the connected
devices due to over current.
238
Error Messages and Actions
Status
The video format of the file for
0
Clip Review is different from the
current [WResolution],
[WFrame Rate], or [WBit Rate]
setting.
[REC] button is pressed when
0
the media in use has no
remaining space.
Remaining space ran out during
0
recording.
No viewable clips are found on the
card for Clip Review.
When the [REC] button is pressed
while a recording media is not
inserted.
No recording media is inserted while
in Media mode or when the
thumbnail screen is displayed.
No clips are found in the inserted
recording media while in Media
mode or when the thumbnail screen
is displayed.
Peripheral devices are connected in
an environment that is subject to
high temperature, and overcurrent
has occurred as a result.
Memo :
The backlight of the LCD monitor
0
may automatically be adjusted
to "Dark" as a form of overcurrent
protection.
Action
Set [WResolution], [WFrame Rate]
and [WBit Rate] correctly.
(A P161 [WResolution/
Resolution] )
(A P161 [WFrame Rate/
Frame Rate] )
(A P162 [WBit Rate/
Rate] )
Replace the recording media with a
new one.
Insert an SD card that contains clips
that can be reviewed.
(A P47 [Recording Media] )
(A P86 [Viewing Recorded
Videos Immediately (Clip
Review)] )
Insert a recording media.
(A P47 [Recording Media] )
Insert a recording media.
(A P47 [Recording Media] )
Insert a recording media that
contains playable clips.
(A P47 [Recording Media] )
(A P97 [Playing Recorded
Clips] )
Take the necessary actions such as
removing the USB devices that are
connected to the camera. The
power of the camera may shut down
if you continue using it in this state.
Bit