Troubleshooting - JVC GY-HC900CHE Instructions Manual

Troubleshooting

Symptom
Power does not turn on.
Unable to start recording.
Camera image is not output on
the LCD monitor and
viewfinder screen.
Camera image is not output on
the LCD monitor.
Camera image is not output on
the viewfinder screen.
Playback does not start after
selecting a clip thumbnail and
pressing the [STATUS/SET]
button (R).
Images on the LCD monitor
and viewfinder screen appear
dark or blurred.
Is the AC adapter properly connected?
0
Is the battery charged?
0
Is the power turned on immediately after it is turned off?
0
Make sure to wait for an interval of at least 5 seconds before turning
on the power again.
Is the write-protect switch of the SD card turned on?
0
Make sure that the write-protect switch is turned off.
(A P48 [Write-Protect Switch on the SD Card] )
Is the camera recorder set to the Camera mode?
0
Use the [CAM/MEDIA] selection button to switch to the Camera mode.
(A P20 [Operation Modes] )
Is the SD card inserted compatible with the recording format?
0
(A P57 [Selecting a Video Format] )
(A P164 [ 4GB File Spanning(SDXC) ] )
Is the camera recorder set to the Camera mode?
0
Use the [CAM/MEDIA] selection button to switch to the Camera mode.
(A P20 [Operation Modes] )
Is the LCD backlight set to "Off"?
0
Press the [B.LIGHT] button to switch the mode.
(A P42 [Adjusting the LCD Monitor] )
Is the CONTRAST knob on the viewfinder set to the minimum?
0
Adjust the [CONTRAST] knob on the viewfinder.
(A P42 [Adjusting the Viewfinder] )
Is the selected clip a playable clip?
0
Playback is not possible if the clip has a different video format setting.
Readjust the brightness of the LCD monitor and viewfinder.
0
Is the [ND FILTER] switch set to "1/64"?
0
Is the iris closed?
0
Is the shutter speed setting too high?
0
Is the peaking level too low?
0
For the LCD monitor, adjust the outline with [LCD/VF] B [LCD
Peaking].
For the viewfinder, adjust the outline with the [PEAKING] knob on the
viewfinder. u v
(A P42 [Adjusting the LCD Monitor] )
(A P42 [Adjusting the Viewfinder] )
Action
Troubleshooting
243