Automatic Chunked Upload To Ftp Server; Uploading Clips Manually (Manual Ftp) - JVC GY-HC900CHE Instructions Manual

Automatic Chunked Upload to FTP
Server
Automatically splits the clips and uploads them to
the FTP server during recording at the
preconfigured time for proxy recording in Slot B
when [System] is configured to "HD+Web".
1 Configure the time to split the clips for
automatic chunked upload
Configure the time in [Network] B [Upload
Settings] B [Auto Upload] B [Division] for
starting automatic upload while recording is in
progress.
Memo :
[Slot] is fixed at "B".
0

Uploading Clips Manually (Manual FTP)

The following are steps to upload clips recorded in
a recording media to a preset FTP server.
All playable clips on the thumbnail screen can be
uploaded.
1 Configure the FTP server for manual
uploading.
Set [Network] B [Upload Settings] B [Upload]
to "Manual".
(A P153 [ Upload ] )
2 Register the [Clip Server].
Open the [Network] B [Upload Settings] B
0
[Clip Server] screen.
Register the server to upload recorded clips
0
in the recording media to.
Up to 4 servers can be registered.
(A P154 [ Clip Server ] )
Memo :
For details on the registered information, please
0
consult the network administrator for the server.
When [Network] B [Upload Settings] B [Upload]
0
is configured to "Auto", manual uploading is also
disabled for slots other than the selected "Slot".
To perform manual uploading, select "Manual".
FTP transfer is disabled when [System] B
0
[Record Set] B [Record Format] B [System] is
configured to "High-Speed". To perform FTP
transfer, select a setting other than "High-
Speed".
Uploading a Video Clip
1 Set the camera recorder to the Media mode.
Press and hold the [CAM/MEDIA] selection
0
button in the Camera mode to enter the
Media mode. A thumbnail screen of the clips
recorded on the SD card is displayed.
You can upload the selected clips on the
0
thumbnail screen to the FTP server.
(A P97 [Thumbnail Screen] )
Uploading a Recorded Video Clip
201