JVC GY-HC900CHE Instructions Manual page 147

o Destination Port
Enter the network port number of the live
distribution destination using an integer between 1
and 65535.
When [Type] is set to "MPEG2-TS/UDP", "MPEG2-
TS/TCP" or "MPEG2-TS/RTP", the default value is
"6504". If "ZIXI" is set, the default value is "2088".
Memo :
When [Type] is set to "MPEG2-TS/RTP", only
0
even numbers from 2 to 65530 can be specified
for the port number.
When [Type] is set to "MPEG2-TS/RTP" and
0
[SMPTE 2022-1 FEC] is set to "On", N+2 and N
+4 port numbers are also used in addition to the
specified port number (N).
o Port
Enter a SRT port number using an integer between
1 and 65535.
The default value is "6504".
Memo :
This item is selectable only when [Type] is set to
0
"SRT".
o Stream ID
For setting the registered stream ID of the live
distribution destination. It allows direct streaming
of multiple cameras on a single device.
The default value varies with the product model.
* Enter not more than 63 characters.
Memo :
Available when [Type] is set to "ZIXI" or "SRT".
0
o Stream Key
Enter the stream key specified at the live
transmission destination.
There is no default value (blank).
* Enter not more than 127 characters.
Memo :
Available when [Type] is set to "RTMP" or
0
"RTMPS".
o Username
For setting the user name.
The default value is "jvc".
* Enter not more than 31 characters.
Memo :
This item is selectable only when [Type] is set to
0
"RTSP/RTP".
o Password
For setting the [Stream ID] password.
For ZIXI, there is no default value (blank).
For RTSP/RTP, a random alphanumeric value that
varies with each model is assigned as the default
value.
* Enter not more than 127 characters. Enter not
more than 31 characters for RTSP/RTP setting.
o Latency
For setting the latency mode.
[Setting Values: High, Medium, RLow, Min]
Memo :
This item is selectable only when [Type] is set to
0
"ZIXI".
o PCR Mode
For configuring the low latency mode.
[Setting Values: Fast, RStandard]
Memo :
Available when [Type] is set to "MPEG2-
0
TS/UDP", "MPEG2-TS/RTP", "ZIXI" or "SRT".
Configuring to "Fast" minimizes the lag but the
0
video image may be disrupted depending on the
shooting and network conditions as priority is
given to low latency. It is intended for use in a
stable network environment to prevent packet
loss from occurring.
147
Network Menu