Web Item - JVC GY-HC500E Instructions Manual

o Mountpoint
Enter the mountpoint (character string for
identifying a stream) for streaming servers that
support multiple streams.
There is no default value (blank).
* Enter not more than 63 characters.
Memo :
This item is selectable only when [Type] is set to
0
"Icecast".
o Latency
Enter the amount of SRT latency using an integer
between 20 ms and 8000 ms.
The default value is "20ms".
Memo :
This item is selectable only when [Type] is set to
0
"SRT".
o Encryption
For configuring SRT encryption.
[Setting Values: On, ROff]
Memo :
This item is selectable only when [Type] is set to
0
"SRT".
o Passphrase
For configuring the SRT passphrase.
There is no default value (blank).
You can enter a passphrase between 10 to 79
characters.
Memo :
This item is selectable only when [Type] is set to
0
"SRT".
This item is selectable when [Encryption] is set
0
to a value other than "Off".
o Resolution (Fixed)
This is fixed at "1280x720".
o Frame Rate
For configuring the frame rate.
When [Record Format] B [Frame Rate] is set to
0
"60p", "60i" or "30p"
[Setting Values: R60p, 30p]
When [Record Format] B [Frame Rate] is set to
0
"50p", "50i" or "25p"
[Setting Values: R50p, 25p]
Memo :
This item is available for setting when [Type] is
0
set to "RTSP/RTP", "ZIXI" or "SRT".

Web Item

Web Access
To access via a web browser, set to "On".
[Setting Values: ROn, Off]
Camera Name
For setting the name to be displayed on the web
browser. Enter not more than 8 characters using
the software keyboard.
(Default value: HC550 A, HC500 B)
Username
For setting the user name. Enter not more than 31
characters using the software keyboard.
(Default value: jvc)
Password
Changes the password for accessing via a web
browser.
The current password is displayed. Enter a new
password directly.
Enter not more than 31 characters using the
software keyboard.
(Default value: random alphanumeric value that
varies with each model)
Port
For configuring the port number during access to a
web page from an external source.
Memo :
Enter the name using the software keyboard.
0
Enter an integer between 1 and 65535. (Default
0
value: 80)
To configure the setting to a number other than
0
the default value, specify the number of an
unused port.
For more details, please consult the
0
administrator of the network in use.
147
Network Menu