Ftp Resume Feature - JVC GY-HC500E Instructions Manual

4 Upload is complete.
After all clips are uploaded successfully,
0
"Successfully Completed." is displayed.
Press the Set button (R) to return to the
thumbnail screen.
When clips are not uploaded successfully,
0
the following errors are displayed.
FTP Upload
Failed.
Internal Error.
Exit
.
(A P249 [List of FTP Transfer Errors] )
Memo :
If a notification such as a an error message
0
appears after shifting to the Camera mode while
FTP transfer is in progress, a 5 icon (yellow) will
appear in the media's remaining level display
area in the Camera mode.
You can press the [MODE] button to switch to
the Media mode and display the above error
screen.
Follow "[List of FTP Transfer Errors] (A P 249)"
to clear the error message.

FTP Resume Feature

When FTP transfer starts and there is a file of the
same name on the server with a file size smaller
than the file to be transferred, the file on the server
will be regarded as an interrupted file during a FTP
transfer. A confirmation screen to resume transfer
(append writing) appears.
Cause of
Error
.
If "Resume" is selected, FTP transfer is carried out
such that it appends from the position where it was
interrupted.
When FTP transfer ends normally, "Complete"
appears on the screen.
Memo :
FTP server equipped with resume function is
0
required.
If [Network] B [Upload Settings] B [Clip Server]
0
B [Clip-FTP1/2/3/4] B [Protocol] is set to
"SFTP", the resume function is disabled.
If "HTTP" is selected in the [Select FTP Proxy]
0
screen of the network connection setting, the
resume function is disabled.
Uploading a Recorded Video Clip
193