JVC GY-HC500E Instructions Manual page 160

Rec Mode
For selecting the mode for recording to the
0
recording media.
(A P91 [Special Recording] )
[Setting Values: RNormal, Pre Rec, Clip
Continuous, Interval Rec, Frame Rec]
Memo :
When [Slot Mode] is set to "Backup Y" or
0
"Backup G", this item is fixed at "Normal".
This is fixed at "Normal" when [System] B
0
[Record Format] B [System] is configured to any
of the following.
4K EXT (SSD)
0
HD EXT(SSD)
0
HD+Web
0
High-Speed
0
9 Pre Rec Time
For setting the pre-recording time when [Rec
Mode] is set to "Pre Rec".
[Setting Values: R5sec, 10sec, 15sec]
Memo :
When [System] B [Record Set] B [Record
0
Format] B [System] is set to "4K", this item is
fixed at "5sec".
9 Rec Frames
For setting the number of frames to record when
[Rec Mode] is set to "Frame Rec" or "Interval Rec".
[Setting Values: R1frame, 3frames, 6frames]
9 Rec Interval
For setting the recording time interval when [Rec
Mode] is set to "Interval Rec".
[Setting Values: R1sec, 2sec, 5sec, 10sec, 30sec,
1min, 2min, 5min, 10min, 30min, 1hour]
160
System Menu
Slot Mode
For setting the operation of the card slot.
Series:
0
Mode that activates slots A and B sequentially.
Dual:
0
Mode that activates slots A and B
simultaneously.
(A P88 [Dual Rec] )
Backup Y:
0
Mode that enables recording to slot B without
using the [REC] button. This item is selectable
only when [Rec Mode] is set to "Normal".
Record, start and stop operations can be
controlled from the [Backup Rec] menu or using
the user button that is assigned with "Backup
Trig".
(A P89 [Backup Rec] )
Backup G:
0
Mode that enables recording to [EXT.SLOT]
without using the [REC] button. This item is
selectable only when [Rec Mode] is set to
"Normal".
Record, start and stop operations can be
controlled from the [Backup Rec] menu or using
the user button that is assigned with "Backup
Trig".
(A P89 [Backup Rec] )
[Setting Values: RSeries, Dual, Backup Y, Backup
G]
Memo :
When this is configured to "Series" and
0
recordable media is inserted into slot A or slot B
or both the slots, pressing the [REC] button
starts recording only to the card in the selected
slot (active slot).
When this is configured to "Dual" and recordable
0
media are inserted into both slots A and B,
pressing the [REC] button starts simultaneous
recording to the cards in both slots.
When [System] is configured to 4K EXT (SSD),
0
HD EXT(SSD) or "HD+Web", "---" is displayed.
When [System] is set to "High-Speed", this item
0
is fixed at "Series".
9 Backup Rec
For starting/stopping backup recording with [REC]/
[STBY].
This item is selectable only when [Slot Mode] is set
to "Backup Y" or "Backup G".
Memo :
When recording is stopped due to no remaining
0
space on the media, etc., this item is fixed at
"STOP" and cannot be selected.