JVC GY-HC500E Instructions Manual page 161

4GB File Spanning(SDXC)
A recording file is automatically split when the size
exceeds 4 GB, but if an SDXC card is used, you
can record clips larger than 4 GB by setting this
option to "Off". (Up to a maximum of 64 GB or 4
hours)
On:
0
Splits a file when it exceeds 4 GB or 30 minutes.
Off:
0
Splits a file when it exceeds 64 GB or 4 hours.
[Setting Values: ROn, Off]
Memo :
This option is only valid if the SD card used for
0
recording is of the SDXC format.
During simultaneous recording, such as Dual
0
Rec and backup recording, this option is valid
only when the SD cards in slots A and B are of
the SDXC format.
LPCM (QuickTime)
For setting the audio recording format of
QuickTime.
[Setting Values: Dual Mono, RStereo]
Time Stamp
For setting whether to display shooting date/time
information in the recorded video.
[Setting Values: On, ROff]
Memo :
The date/time display style can be changed in
0
[Date Style]/[Time Style].
(A P155 [ Date Style ] )
(A P156 [ Time Style ] )
The setting cannot be changed during
0
recording, streaming or Return over IP.
When [System] is set to "4K EXT (SSD)", "4K",
0
"HD EXT(SSD)" or "High-Speed", this item is
fixed at "Off".
When [Overlay Function] is set to "Enable", this
0
item is fixed at "Off". A L
Clip Set
9 Clip Name Prefix
For configuring the first four characters of the name
of the clip file to be recorded to the recording media.
Enter any of the 36 characters including alphabets
(upper case) and numbers (0 to 9) using the
software keyboard.
(A P109 [Text Input with Software Keyboard] )
[Setting Values: xxxG] (The default value of xxx is
the last three digits of the serial number.)
9 Reset Clip Number
For assigning a new number (Clip Number) by
resetting it (0001).
Select [Reset] and press the Set button (R) to reset
the number.
If there are other clips on the recording media, it will
be assigned with the smallest available number.
Example:
0
If the [Clip Name Prefix] is "ABCD" and
"ABCD0001" already exists on the recording
media, "ABCD0002" will be assigned.
Clear Planning Metadata
Erases the planning metadata downloaded from
the FTP server.
This item also deletes the metadata loaded using
the setup files ("User File"/"All File").
161
System Menu