Zoom Function Settings - JVC GY-HC500E Instructions Manual

Infrared
When "On" is selected, an I icon appears and the
camera recorder switches to the infrared recording
mode that is suitable for night recording.
Using infrared illumination allows images to be
captured naturally in a pitch-dark environment. It is
recommended for observation of animals without
alerting them or for natural facial expressions
without firing glaring flash light at the subject.
[Setting Values: On, ROff]
Caution :
Do not use infrared recording for capturing
0
strong light sources or heat sources. Doing so
may damage the camera recorder.
Memo :
This is fixed at "Off" when [FULL AUTO] is set to
0
"ON".
The settings are fixed as followed when it is
0
configured to "On".
Manual focus
0
ND filter "OFF"
0
[Camera Function] B [Focus] B [AF Assist]
0
and [MF Assist] appear as "---".
All items other than [Color Space] and
0
[Reverse Picture] under [Camera Process]
appear as "---".
The zoom and focus positions will be initialized
0
after the settings are changed.
When [Infrared] is configured to "On", if the type
0
of light source changes after focus is
established, the image may go out of focus.
User Switch Set...
For specifying user button related settings.
(A P116 [User Switch Set Item] )
KEYLOCK
For specifying the settings when the [KEYLOCK]
switch is set to "ON".
[Setting Values: RKeylock Except Rec, Keylock
All]
Menu Access
For specifying settings on the behavior when
accessing the menu using the [MENU/THUMB]
button.
[Setting Values: Press and Hold, ROne Press]
Camera Angle[Tagging] L
For specifying tagging settings for the camera
angle.
[Setting Values: SB, RSL, EZ, SL2, EZ2, TV]

Zoom Function Settings

Dynamic Zoom
For setting whether to enable the dynamic zoom
function.
On:
0
Enables the dynamic zoom (1x to 40x).
Off:
0
Enables only the optical zoom (1x to 20x).
[Setting Values: On, ROff]
Memo :
When [System] is set to "4K EXT (SSD)", "4K" or
0
"High-Speed", this item is fixed at "Off" and
cannot be selected.
When [Digital Extender] is set to "On", "Off"
0
becomes fixed and cannot be selected.
9 Response
For specifying the speed of zoom response when
Dynamic Zoom is "On".
[Setting Values: Slow, RNormal]
Memo :
When [Dynamic Zoom] is "Off", this item
0
appears as "---" and cannot be selected.
Digital Extender
For specifying whether to magnify the image (by 2
times). When "On" is selected, a F icon appears.
[Setting Values: On, ROff]
Memo :
When [System] is set to "4K EXT (SSD)", "4K" or
0
"High-Speed", this item is fixed at "Off" and
cannot be selected.
When [Dynamic Zoom] is set to "On", "Off"
0
becomes fixed and cannot be selected.
Handle Zoom Speed
This function allows you to set the zoom speed of
the zoom lever at the handle when the [ZOOM FIX/
VAR/OFF] switch is set to "FIX".
[Setting Values: 1 to 8 (R 5)]
Camera Function Menu
113