Special Recording; Pre Rec - JVC GY-HC500E Instructions Manual

5 Stop backup recording.
Select [STBY] in [System] B [Record Set] B
0
[Slot Mode] B [Backup Rec] and press the
Set button (R).
(A P160 [ Slot Mode ] )
You can also press the user button that is
0
assigned with "Backup Trig".
(A P116 [User Switch Set Item] )
Recording to slot B or [EXT.SLOT] stops, and
0
the card slot mark of slot B or [EXT.SLOT]
turns white (unselected state).
The status indicator of slot B or [EXT.SLOT]
0
lights up in green.
White
282min
100min
50min
1 /64
ND
4030 20 10 0
F2.8
.
Memo :
When one of the media has run out of free space
0
during backup recording, recording will stop
only for the card that is full.
When recording to each slot is stopped,
0
recording in the Regen mode will be enabled for
the card slot in which recording started.
When recording is started in the other slot while
0
recording to one slot, the clip being recorded is
split and simultaneous recording to the other
card starts.
When either normal recording or backup
0
recording is stopped while both are in progress,
the clip in the slot where recording is still ongoing
will be split.
Although the clips are separated during
0
recording the clips can be seamlessly joined by
arranging them on the timeline of the editing
software since they are recorded seamlessly.
Clip Cutter Trig cannot be performed during
0
backup recording.
(A P96 [Splitting the Clips Freely (Clip Cutter
Trig)] )
When [Slot Mode] is configured to "Backup Y"
0
or "Backup G", [Rec Mode] cannot be
configured to a setting other than "Normal".
(A P160 [ Rec Mode ] )
00: 00: 00.00
5 . 6f t
12 :34 :56
100min
50min
AE ±
0
1 / 60
B 5600 K
ISO
102400

Special Recording

Besides the normal recording mode, four special
recording methods are available in this camera
recorder. They are Pre Rec, Clip Continuous,
Frame Rec and Interval Rec.
Select a mode from [System] B [Record Set] B
[Rec Mode].
(A P160 [ Rec Mode ] )
Memo :
Special recording cannot be selected when
0
[System] B [Record Set] B [Record Format] B
[System] is set to "4K EXT (SSD)", "HD
EXT(SSD)", "HD+Web" or "High-Speed".
Special recording cannot be selected when the
0
slot mode is configured to "Backup Y" or "Backup
G".

Pre Rec

By setting the number of seconds in the [Pre Rec
0
Time], you can start recording video and audio
before actual recording starts based on the [Pre
Rec Time] setting.
When starting actual recording while the camera
0
recorder is in Recording Standby (STBYO)
mode, you can start recording a few seconds
earlier based on the [Pre Rec Time] setting.
Using Pre Rec allows you to record a complete
0
event without missing the initial scenes even if
you start the recording late.
Memo :
Pre Rec Time can be set in [System] B [Record
0
Set] B [Rec Mode] B [Pre Rec Time].
When [System] is set to "4K":
0
Fixed at "5sec"
When [System] is set to "HD" or "SD":
0
"5sec", "10sec" or "15sec"
(A P160 [ Pre Rec Time ] )
91
Backup Rec