Selecting And Performing Operations On Multiple Clips; Selecting Multiple Clips Randomly - JVC GY-HC500E Instructions Manual

Selecting and Performing
Operations on Multiple
Clips
Multiple clips can be selected during thumbnail
0
screen or playback screen display.
After selecting multiple clips, perform
0
appending/deleting of OK mark, deleting of clips
using the action selection screen.
After selecting multiple clips, the selections will
0
be canceled by the following operations.
When [Deselect All] in the action menu is
0
selected
When exiting Media mode from the thumbnail
0
screen
When the recording media is removed
0
When switching the slot in use
0
104

Selecting and Performing Operations on Multiple Clips

Selecting Multiple Clips Randomly

1 Move the cursor to a clip without a check
mark, and press the [OIS/2] button.
A green check mark appears on the clip.
.
2 Repeat Step 1 to select multiple clips.
Multiple clips can be selected.
0
Press the [ONLINE/3] button while the
0
multiple clips are selected.
Appends OK mark together:
0
[Add OK Mark] B [Selected Clips]
Deletes OK mark together:
0
[Delete OK Mark] B [Selected Clips]
Uploading selected clips to the FTP server
0
together:
[FTP Upload] B [Selected Clips]
Deletes selected clips together:
0
[Delete Clips] B [Selected Clips]
Memo :
Selecting clips appended with check mark and
0
pressing the [OIS/2] button will cancel the
selection.
If the operation is performed on multiple clips at
0
the same time, a progress bar appears. You can
stop the operation by pressing the Set button (R)
while the operation is in progress. However, it is
not possible to undo operations that are
completed.
1