JVC GY-HC500E Instructions Manual page 126

UB Mode
For setting the recording mode of the user's bit.
Date:
0
Records the date.
Time:
0
Records the time.
Preset:
0
Records according to the preset setting.
(A P80 [Setting the User's Bit] )
[Setting Values: Date, Time, RPreset]
Memo :
If [UB Mode] is set to "Time", the user's bit
0
operates in the 24-hour format even if the LCD
display is in the 12-hour format.
9 Preset
For setting the user's bit. (Digit by digit)
Display : AB CD EF 01
(A P80 [Presetting the User's Bit] )
Memo :
When [UB Mode] is set to "Date" or "Time", this
0
item appears as "---" and preset is disabled.
When [TC Generator] is set to "Regen", this item
0
appears as "<Regen>" and preset is disabled.
Drop Frame
For setting the framing mode of the time code
generator.
Non Drop:
0
Internal time code generator works in the non-
drop-frame mode. Use this setting when placing
emphasis on the number of frames.
Drop:
0
Internal time code generator works in the drop-
frame mode. Use this setting when placing
emphasis on the recording time.
[Setting Values: Non Drop, RDrop]
Memo :
This item can be set only when [System] B
0
[Record Set] B [Record Format] B [WFrame
Rate] is set to "60p", "30p", or "60i".
However, when "Free Run (GPS)" is selected for
[TC Generator], this item is fixed at "Drop" and
cannot be selected. L
When [Frame Rate] is "24p", "Non Drop"
0
becomes fixed and cannot be selected.
When [Frame Rate] is "50p", "25p", or "50i", this
0
item appears as "---" and cannot be selected.
(A P158 [WFrame Rate/ GFrame Rate] )
126
TC/UB Menu