JVC GY-HC500E Instructions Manual page 167

E Camera Angle [Tagging] L
Displays the camera angle tagging information
when [WFormat] is configured to "Exchange".
F ODK [Tagging] L
Displays the ODK (Offence, Defence, Kick)
tagging information when [WFormat] is
configured to "Exchange". It flashes in red when
in the REMOVE mode.
G Black Toe
Displays the Black Toe setting.
Memo :
The "Normal" appears for 3 seconds after
0
changing to Normal.
H Color Space Display
Displays the color space.
Memo :
This can be configured in [Camera Process] B
0
[Color Space].
(A P119 [ Color Space ] )
I Audio Level Meter
Displays the audio levels for CH-1 to CH-2.
0
a appears on the screen when in the Auto
0
mode.
4030 20
.
This is grayed out when in a mode that does
0
not support audio recording or when the
audio is not supported.
J Iris F-Number
Displays F-number of the lens iris.
(A P65 [Adjusting the Iris] )
Memo :
A a icon appears on the left side of the lens
0
aperture value (F-number) during Auto Iris
mode.
While in the Auto Iris mode, and [AE Lock] is set
0
to "AE" or "AE/FAW", a
left side of the lens aperture value (F-number)
during lock operation.
(A P117 [ AE Lock ] )
K ND Filter Position
Displays the current ND filter position.
10 0
icon appears on the
L Shutter
The current shutter speed appears on the
0
screen.
(A P111 [ Shutter ] )
When the camera recorder is switched to the
0
Full Auto shooting mode by turning the [FULL
AUTO] switch to "ON" or when it is switched
to the Automatic Shutter mode with [Camera
Function] B [Shutter] configured to "EEI", the
a icon appears on the left side of the shutter
speed.
Memo :
The variable range of the shutter speed varies
0
according to the video format settings.
(A P67 [Setting the Electronic Shutter] )
While in the Automatic Shutter mode, and [AE
0
Lock] is set to "AE" or "AE/FAW", a
appears on the left side of the shutter speed
during lock operation.
"[OFF]" appears for 3 seconds after Shutter is
0
configured to Off.
"[OFF]" is displayed when in the low-light
0
shooting mode.
M AE Level
Displayed when the AE function is activated.
0
When operated while manual operation is
0
disabled, "AE" blinks for about 5 seconds.
N Gain
You can select to display the gain in "dB" or
0
"ISO".
(A P131 [ Gain ] )
Displays the gain value when in the Manual
0
Gain mode.
A a icon appears on the left side of the gain
0
value in the "AGC" mode.
"LUX" is displayed to the left of the gain value
0
when in the Low-light shooting mode.
Memo :
While in the "AGC" mode, and [AE Lock] is set
0
to "AE" or "AE/FAW", a
left side of the gain value during lock operation.
Display Screen in Camera Mode
icon
icon appears on the
167