Web Item; Metadata Server Item - JVC Connected Cam GY-HC900CHU Instructions Manual

Web Item

Web Access
To access via a web browser, set to "On".
[Setting Values: ROn, Off]
Camera Name
For setting the name to be displayed on the web
browser. Enter not more than 8 characters using
the software keyboard.
(Default value: HC900)
Username
For setting the user name. Enter not more than 31
characters using the software keyboard.
(Default value: jvc)
Password
Changes the password for accessing via a web
browser.
The current password is displayed. Enter a new
password directly.
Enter not more than 31 characters using the
software keyboard.
(Default value: random alphanumeric value that
varies with each model)
Port
For configuring the port number during access to a
web page from an external source.
Memo :
Enter the name using the software keyboard.
0
Enter an integer between 1 and 65535. (Default
0
value: 80)
To configure the setting to a number other than
0
the default value, specify the number of an
unused port.
For more details, please consult the
0
administrator of the network in use.

Metadata Server Item

Meta-FTP1, Meta-FTP2, Meta-FTP3, Meta-
FTP4
* The name that is set in [Alias] is displayed
individually.
o Alias
For setting a name to distinguish the settings of this
camera.
The name set in this item will be displayed in the
[Import Metadata] options.
* Enter not more than 31 characters.
o Protocol
For setting the protocol of the FTP server to be
connected.
FTP:
0
Protocol that does not encrypt the incoming and
outgoing data.
SFTP:
0
Protocol that encrypts incoming and outgoing
data using SSH.
FTPS:
0
Protocol that encrypts incoming and outgoing
data using SSL or TLS. It uses an implicit mode
(starts encrypted communication once
connection starts).
FTPES:
0
Protocol that encrypts incoming and outgoing
data using SSL or TLS. It uses an explicit mode
(starts encrypted communication after
permission is granted).
[Setting Values: RFTP, SFTP, FTPS, FTPES]
o Server
For setting the server name ("mystation.com", etc.)
or the IP address ("192.168.0.1", etc.) of the FTP
server.
* Enter not more than 127 characters using
single-byte alphanumeric characters (a to z, 0 to
9), single-byte hyphen [-], or dot [.].
o Port
Enter the FTP server port number to use using an
integer between 1 and 65535.
The default value varies with the protocol setting.
(FTP: 21, SFTP: 22, FTPS: 990, FTPES: 21)
o File Path
Enter the path name for the metadata file ("/pub/
meta.xml", "/home/user/meta2.xml", etc.)
Enter not more than 127 characters.
0
145
Network Menu