Displaying The Histogram; Recording Simultaneously At Two Different Definitions; Series Rec - JVC GY-HC500E Instructions Manual

Displaying the Histogram

The histogram shows the brightness distribution,
and is employed mainly for checking the exposure
of the image.
1 Set the histogram feature to ON.
Set [LCD/VF] B [Display Type] B
0
[Histogram] to "On".
You can also press the user button that is
0
assigned with "Histogram".
(A P116 [User Switch Set Item] )
2 Set the upper and lower limits of the
histogram display.
After setting, the brightness level is displayed in
red color.
Item Settings
Top Sets the maximum
brightness limit for
changing the
histogram display
color
Bottom Sets the minimum
brightness limit for
changing the
histogram display
color
o When the upper limit is set to 110% and the lower
limit to 0%
.
* The area in red is not displayed.
o When the upper limit is set to 90% and the lower
limit to 10%
Bottom
.
How to read the histogram
The vertical axis denotes the number of pixels.
0
The horizontal axis denotes the pixel
0
brightness.
Options
5% to 110% (in 5 %
increments)
0% to 105% (in 5 %
increments)
Top
Recording
Simultaneously at Two
Different Definitions
By setting [System] to "HD+Web", you can record
simultaneously at two different definitions.
When HD+Web is selected:
0
Records a high-definition (HD) file to slot A and
a web file to slot B at the same time.
Web files can be used as a proxy file for the HD
file.
Memo :
If a recordable SD card is inserted into only one
0
of the slots, files will only be recorded to that slot.
The [Rec Mode] is fixed at "Normal".
0
Clip Cutter Trig is disabled.
0
[Slot Mode] cannot be selected.
0
Clip Review can only be performed for slot A.
0
("No Media" appears if there is no card in slot A
while a card is inserted into slot B.)
Playback of web files is only possible from slot
0
B when "HD+Web" is selected.

Series Rec

Series Rec mode is specified in the factory
0
default.
([System] B [Record Set] B [Slot Mode] is set to
"Series".)
(A P160 [ Slot Mode ] )
If both the slots are loaded with recordable
0
cards, pressing the [REC] button starts
recording only to the media in the selected slot.
When the remaining space in the selected
media runs out, recording continues by
automatically activating the media in the other
slot.
The slot mode can be identified on the status
0
screen.
Displaying the Histogram
87