Spring holder
Rear side
5. Remove the SP FAN UNIT and plate.
6. Remove the flanges, slide cam, OC cam and bearings..
7. Lift and slide the Nip roller to the right. And remove it from its left end.
Installation
1. Assembly by reveres order.
(
Lubrication is necessary refer to lubrication table
(50) DV Roller ASY replacement
[For the front side]
Removal
1. Remove the upper cover.
NIPspring
Rear side
NIP gear
Rear side
Figure 4.76 Nip Roller ASY replacement
Figure 4.77 NIP Roller ASY replacement
)
97
NIP Roller ASY
Rear side