Table of Contents
Advertisement
●
●
●
●
●
●
●
●
●
●
Denotes a button that is pressed down to activate a test mode.
Note 1: Print a listing of the printer setup before resetting the EEPROM. Then reprogram the printer to the
required
settings. Reset items are as follows: (1)Settings
of Setup
(2)Mechanical settings
(3)Error Log
a) All EEPROM Reset: ONLINE + TEAR OFF + LOAD: Reset (1), (2), (3)
b) EEPROM All Settings Reset : LF/FF + ONLINE + LOAD: Reset (1) and (2)
c) EEPROM Reset : TEAR OFF + LOAD: Reset (1) only
●
●
●
●
●
●
●
●
TOF adjustment Mode
PE adjustment Mode
●
Left start position adjustment mode.
●
Skew detect adjustment mode.
Factory adjustment mode
Sensor adjustment Mode
●
●
●
All EEPROM Reset (Note 1, a)
●
●
EEPROM All Settings Reset (Note 1, b)
●
●
Reset set up value. (Note 1, c)
●
Error Log Clear
●
●
Flash ROM Update Mode
No Print Mode
List Setup Parameters
Demonstration Print Mode
129
Advertisement
Table of Contents
