Upper Cover Replacement - Fujitsu ULTIMA90 Maintenance Manual

(12) Upper Cover replacement

Removal
1. Remove the control panel.
2. Remove the two screws securing the upper cover.
3. Raise the soundproof cover.
4. Disengage the hooks on the front left and right of the upper cover, then lift off the upper cover.
5. Remove the soundproof cover.
Installation
1. Install the soundproof cover.
2. When installing the upper cover, pass the control panel cable and cover open switch cable through the
openings on the upper cover and control panel holder.
3. Hereafter, follow the removal procedure in reverse order.
Figure 4.26 Front cover replacement
52
Screw