Fujitsu ULTIMA90 Maintenance Manual page 56

9. Unplug cables from mechanism unit.
(SP motor cable, LF motor cable, TR motor cable, RF motor cable, Carrier cable (3 flat cables), RCSF cable,
Relay cable, INLK sw cable, CO sw cable, FAN2 cable, FAN3 cable, FAN4 cable. Total 14 cables)
10. Remove the screws securing the FG
cable 11. Lift the mechanism unit higher and
remove it.
INLK sw cabl e
Installation
1. Install the mechanism assembly by reversing the removal procedure.
Figure 4.31 Print Mechanism Unit replacement
CO sw cable
FAN3 cable
Relay cable
SP motor cables
Figure 4.32 Print Mechanism Unit replacement
LF Motor cable TR Motor cable
Carrier cable
(3 FFC Cables)
56
FAN2 cable
FAN4 cable
RF Motor cable
R-CSF