Fujitsu ULTIMA90 Maintenance Manual page 22

5 Printing is partly blank or the ribbon is out of place.
The ribbon is loose.
The ribbon is vertically misaligned.
The ribbon is twisted.
• The manual paper
thickness adjustment dial
is set improperly. (Because
the paper thickness setting
is too narrow, the ribbon
is loosened.)
• The ribbon is loosened on
a locally thick portion of
paper.
• The ribbon is partly
twisted.
• Poor card guide
adjustment influenced
ribbon movement.
• The ribbon cartridge is
defective.
• The ribbon setting is
inadequate.
22
• Adjust the manual paper
thickness adjustment dial
properly according to
paper thickness.
• Check the paper
specifications.
• Check whether the ribbon
is twisted.
• Adjust the card guide.
• Replace the ribbon
cartridge.
• Set the ribbon properly.