Installation - Fujitsu ULTIMA90 Maintenance Manual

Front feed tractor.
Removal
1. Raise the paper table.
2. During pressing the Rock lever, Lift the left and right sides of the tractor unit, and then remove the tractor unit.
Lock lever

Installation

1. Engage the U-grooves on the left and right sides of the tractor unit with the counterpart pins on the printer. (fit
the ditch of left pin, there is any ditch of the right pin)
2. Press down the front shaft of the tractor unit to lock the unit.
3. Make sure that left and right mounting pins 2 have been hooked by lock levers.
G uide pin
Rear feed tractor.
Removal
Figure 4.4 Front feed tractor Removal
U - shaped slot
Figure 4.5 Front feed tractor Installation
Soundproof cover
Lock lever
G uide pin
U - shape d slot
36