Level 2 Maintenance; Parts Replacement - Fujitsu ULTIMA90 Maintenance Manual

*1 If paper becomes smeared or dirty, clean the platen. Use a very small amount of alcohol and wipe with clean
cloth.
Stay shaft

4.9 Level 2 maintenance

Level 2 maintenance includes lubrication, adjustment, and parts replacement. Level
1 maintenance should be done at the same time.

4.9.1 Parts replacement

Remember the following notes when replacing any component.
Keep working area clean.
Turn off power to equipment and unplug it before disassembled.
Follow procedures carefully. Do not disassemble the parts that are not to be disassembled.
Store disassembled parts in a clean place where they will not get lost.
Check parts for number and shape after replacement, and adjust them if necessary.
Reassemble the printer, following the steps in reverse order of disassembly.
Confirm that all connectors are connected correctly.
RECOMMENDED SPARE PARTS
The following table lists parts and product numbers to be used when replacing spare parts, and the sections that
explain the replacement:
Print head
Figure 4.3 Cleaning and lubrication
Area FCI
33
Card guide
FEL FSBT ASIA FTL FAL FSE