Table of Contents
Advertisement
A
cut-sheet feeder allows both single-part cut sheets and multi-part cut sheets to be fed automatically.
The SF94 single-bin feeder is available for DL7600.
b. Tractor unit
An additional tractor unit can be installed in the printer. Because the standard tractor unit is installed at the
front of the printer at shipment, the additional tractor is installed at the rear of the printer. However, both
tractor units are the same, and installable at either position.
c. LAN card.
A
LAN card is available as a printer add-on option. A user installable function, the LAN card can be
installed only on printer models with the Centronics parallel + USB interfaces.
d. Large paper table
The large paper table helps to increase operability when large cut sheets are used. Also,
sheets that are output from the front are easier to keep properly organized.
e. Small paper table
The Small paper table helps to increase operability when small cut sheets are used.
f. Large stacker.
The large stacker accommodates sheets output from the rear.
It is used in continuous printing with a cut sheet feeder.
g. Print head
The 24-wire print head is easily installed on and removed from the print head carriage.
11
Advertisement
Table of Contents
