Table of Contents
Advertisement
3 . Connect the fan connector.
FAN connector
Print head
Note. Be carefully to insert the card edge straightly.
4. Fix the print head by two screws..
5. Insert the fan cables under black plastic part.
Note. If the FAN cable protrude from black plastic part.
FAN cable may be damaged by ribbon feed mechanism on left side frame.
Screws
Note: The following adjustments are required after installation:
- Bi-directional printing positions
Card edge
Connector
Figure 4.23 Print head Installation
Figure 4.24 Print head Installation
50
Bosses of Print head
Advertisement
Table of Contents
