Check For Hydraulic Leaks - Genie Z-25/8 Service Manual

Section 4 • Scheduled Maintenance Procedures
TABLE A PROCEDURES
3 Lower the boom to the stowed position.
4 Remove the hydraulic oil filler cap/dipstick,
located on top of the hydraulic tank.
5 Fill the hydraulic tank to the
filler cap/dipstick. Do not overfill tank.
Hydraulic Oil Specifications - All Models
Hydraulic oil type
Hydraulic tank capacity
Hydraulic system
(including tank)
4 - 4
line on the oil
FULL
Dexron equivalent
8 gallons
30.3 liters
10 gallons
37.9 liters
Genie Z-20/8N & Genie Z-20/8 & Genie Z-25/8
A-5

Check for Hydraulic Leaks

Detecting hydraulic fluid leaks is essential to
operational safety and good machine performance.
Undiscovered leaks can develop into hazardous
situations, impair machine functions and damage
machine components.
1 Inspect for hydraulic oil puddles, dripping or
residue on or around the following areas:
· Hydraulic tank—filter, fittings, hoses and
chassis surface
· Hydraulic power units, fittings,
hoses, and chassis surface
· All hydraulic cylinders
· All hydraulic manifolds
· Boom linkage
· The underside of the drive chassis
· Ground area under the machine
First Edition • Third Printing
Part No. 41314