C-3.2.6 Hydraulic Gearbox; C-3.2.7 Steering Mode Selection; C-3.2.8 Road/Cab Switch - Genie GTH-2306 Operator's Handbook Manual

■ C-3.2.6
Hydraulic gearbox
25 Selection button
Two-position button for changing between low
and high hydraulic speed.
1 Press the button to select the high speed;
the button lights up.
2 Press the button again to select the low
speed; the button light switches off.
■ C-3.2.7
Steering mode selection
15 Steering mode switch
Three-position switch for the selection of the
steering mode:
1 Crab steering
2 Two-wheel steering
3 Four-wheel steering
Handler with telescopic boom GTH-2306
OPERATING INSTRUCTIONS
R
15
Document 57.0002.2200 - 12/2002
■ C-3.2.8
Road/Cab switch
26 Selection button
Button with two stable positions:
1 Press to select the road setting. The high
speed can be engaged, the boom control
is disabled and only the two-wheel
steering is enabled. The built-in button
light switches on.
2 Press the button again to select the work
setting and enable the boom control and
the four-wheel steering. The built-in
button light switches off.
Before switching on the ROAD function, align the
rear wheels of the machine.
25
C-11
Page
DANGER
26