Primary Trouble Isolation - Agilent Technologies 54845B Manual

Table of Contents

Advertisement

Chapter 5: Troubleshooting

Primary Trouble Isolation

Primary Trouble Isolation

The actions in the Primary Trouble Isolation are done without disassembling the instrument.
Interaction of the front panel with the rest of the instrument and other indicators are used to
help identify the problem area.
A letter is assigned to boxes in the flowchart. The letter corresponds to a specific section in the
reference text. Be sure to use the flowchart itself for your troubleshooting path.
Perform power-up.
A
1 Power-on the instrument.
Figure 5-2
Power-on Display Default (Graphical Interface Disabled)
2 Press the Default Setup key.
Check the display.
B
The display on the screen should be similar to the figure above. If there is no display on the
oscilloscope flat-panel display after power-up, go to the No Display Trouble Isolation Flowchart
otherwise go to step C.
5–6
A short time after the instrument is turned on, the scope graticule is displayed on the
screen. The screen should look similar to the next figure. The exact appearance may vary
depending on the setup selected before the instrument was turned off.

Advertisement

Table of Contents
loading

This manual is also suitable for:

54846b

Table of Contents