Table of Contents
Advertisement
66
CoolSmart TV - Combustible "Over-Facing" (Optional)
When using the CoolSmart TV kit, Combustible material can be installed over the front of the fireplace. The
combustible material MUST be installed over ½" non-combustible board. See the two options below.
NOTE:
The maximum facing depth (combustible + non-combustible facing) is 1-1/4". Any facing that extends
farther than 1-1/4" must meet mantel clearances.
WARNING: The front of the appliance is subject to high temperatures which may cause discoloration and/or
material degradation. Take this into account when choosing finishing materials.
Installation With Thick Facing Guide (facing butts thick facing guide) - STANDARD
NOTE:
Leave the thick facing guide
in place on the fireplace.
NOTE:
The screen assembly
mounts should be left in the
stock position (all the way
in).
Installation Without Thick Facing Guide (screen assembly overlaps facing)
Note:
Remove the thick facing
guide on the fireplace (it is
not used with this
configuration).
Note:
The screen assembly
mounts will need to be
moved out to
accommodate the
thickness of the facing (see
installation manual for
details).
Warning:
When not using the thick facing
guide, a 3/16" (4.8mm) air space
is required from all four sides of
the tile stop on the fireplace to
the combustible facing (see
details below).
© Travis Industries
Installation
(for qualified installers only)
Combustible Facing
Allowed
Non-Combustible board
Non-Combustible
Facing Only
Screen Assembly
Combustible Facing
Allowed
OVER
Non-Combustible board
Non-Combustible
Facing Only
Screen Assembly
4/21/20 - 1458
OVER
Max Depth
1-1/4" (32mm)
Combustible
Fireplace side
Th
Thick Facing
Guide
Tile Stop
Combustible Facing
3/16" (4.8mm)
Fireplace side
Tile Stop
PB 72 MV/GSB2/GSR2 Install
Facing
Required
Air Space
Advertisement
Table of Contents
