Table of Contents
Advertisement
LP Conversion Instructions
WARNING
This conversion kit shall be installed by a qualified service agency in accordance with the manufacturer's
instructions and all applicable codes and requirements of the authority having jurisdiction. If the
information in these instructions is not followed exactly, a fire, explosion or production of carbon
monoxide may result causing property damage, personal injury or loss of life. The qualified service
agency is responsible for the proper installation of this kit. The installation is not proper and complete until
the operation of the converted appliance is checked as specified in the manufacturer's instructions
supplied with the kit.
The parts required to convert this appliance to us LP gas are included in the stove pack that was
shipped with the appliance. The conversion kit contains the LP manual regulator and Torx
wrench, burner orifice, and pilot orifice.
1. Access the firebox.
2. Remove the media tray. Remove the 16 screws holding it in place (1/4" nutdriver). (Due to the length of the
unit we are only showing one half of the media tray).
© Travis Industries
Installation
(for qualified installers only)
4/21/20 - 1458
PB 72 MV/GSB2/GSR2 Install
53
Advertisement
Table of Contents
