Removing The Front Panel - FireplaceXtrordinair ProBuilder 72 Linear Installation Manual

Removing the Front Panel

The front cover may be removed to access the components. This is required when relocating the electrical or gas
inlet location. To remove the front cover
(a) Remove the center wingnuts.
(b) Loosen the two outer screws.
(c) Rotate the front panel down.
(d) Remove the front cover.
© Travis Industries
Installation
(for qualified installers only)
1/4" Nutdriver/Wrench
4/21/20 - 1458 PB 72 MV/GSB2/GSR2 Install
21