FireplaceXtrordinair ProBuilder 72 Linear Installation Manual page 71

4 Insert a starter collar into each of the (6) holes that were uncovered in the previous step and bend the
tabs to secure the starter collar to the fireplace.. Seal the joints with silicone caulk or aluminum (U.L.
181A-P) tape
5 Install the fireplace into the framed chase. See section "Installation" in the manual.
NOTE: With the use of this kit, the clearance to combustible material may be reduced. Combustible material
may be installed to the top of the fireplace box. Non-combustible is still required on all front surfaces of
the fireplace box.

See instructions included with the CoolSmart TV kit for further details.
© Travis Industries
Installation
(for qualified installers only)
Starter Collar
4/21/20 - 1458
Use silicone to seal the
starter collar to the top
of the fireplace.
Bend the tabs on the
bottom of the starter
collar up to lock it in
place.
PB 72 MV/GSB2/GSR2 Install
71