Table of Contents
Advertisement
Figure 55. Configure dialog box - IP addresses
3. Select the IP Addresses tab.
4. Set the IP addresses by doing one of the following:
5. Click OK to save the settings.
Setting an access password
Web TLC limits access to the system by means of passwords set on the
configuration screen. Web TLC passwords allow for two levels of system access:
v Level 1 access allows operator viewing of library status only.
v Level 2 access allows full control, permitting the user to move tapes and modify
library configuration settings.
Note: Level 2 access can be disabled entirely.
To set an access password, complete the following procedure:
1. Establish communications with the library.
56
4560SLX Tape Library: User's Guide
An upload process screen is displayed for a moment and then the Configure
dialog box appears:
v Select the check box if you want the addresses to be set by a Dynamic Host
Configuration Protocol (DHCP) or BootP server.
v Specify the addresses individually.
Get other manuals https://www.bkmanuals.com
Advertisement
Table of Contents
