Table of Contents
Advertisement
Figure 48. Status screen
Power
This option initiates a library power-down operation. Figure 49 shows the
confirmation screen that is displayed when this option is selected. The library
moves the shuttle assembly to the parked position before powering down.
Figure 49. Power Down Initiation screen
Using tape cartridges
This section describes how to remove magazines, insert cartridges into a magazine,
use the mail slot, and use bar codes.
Removing magazines
A magazine must be removed from the library in order to replace tape cartridges.
Before you remove a magazine, make sure the slot you want to use is not already
reserved for a tape cartridge that is in a tape drive. The safest way to do this is to
unload all tape drives before removing a magazine. You can unload all the tape
drives either through your host system software or by using the Move Media
option on the library default screen.
You must manually remove the library magazines. To access the magazines, use
the Magazine Access Option Default screen. This option enables you to open the
left or right magazine doors separately or both magazine doors at the same time.
After opening the appropriate magazine door, pull the magazine out and away
from the library chassis as shown in Figure 50 on page 41.
40
4560SLX Tape Library: User's Guide
Get other manuals https://www.bkmanuals.com
Advertisement
Table of Contents
